破碎机分类
引进新闻

PCN可逆式破碎机

PCN可逆式破碎机

PCN可逆式破碎机  依照公司研制的可逆式破碎机分为有筛板型和无筛板型,发生筛板型通过筛板孔规格调节有料颗粒,不论筛板型通过反击板和锤头的距离调节有料颗粒,可以加装液压开启装置。依照设备一般作为二级破碎设备广泛用于高速公路,水库、铁路、机场等,针对石料要求较高的领域,抗压强度不超越360兆帕各种物料。

  Reversible company developed the crusher consists of sieve plate and no plate, a plate type through the sieve hole size adjusting discharging particles, no sieve through the counterattack plate and hammer distance adjusting material particles, can be installed a hydraulic open device. This equipment is generally used as the two stage crushing equipment widely used in highway, railway, airport, dam, on the stone demanding areas, compressive strength less than 360 MPa of various materials.
  工作原理:
  由于电机驱动破碎机转子盘,带锤头做圆周运动,当物料由破碎机�J料口�J切合破碎腔后,受到锤头的快速撞击使物料不断的快速撞击破碎,下一场由反击衬板上,弹回到握头作用区,再反击破碎,直至物料破碎至所需粒度,由于机械下部排出为止。
  Working principle.
  Driven by the motor to drive the hammer crusher rotor disc, a circular motion, when the material by the crusher feeding port feed crushing cavity, high impact by the hammer impact crushing the material continuously, and then from the counterattack lining board, rebound the hammer action area, re impact crusher, crushing to the required until particle size, discharged from the lower part of the machine.
PCN可逆式破碎机
性能特点:
  1、破碎比大,破碎率高;
  2、维修方便;
  3、转子可正反转,如果锤头、反击板、暖板均匀磨损;
  4、调减维修时间。
  Performance characteristics:
  1,big crushing ratio, high crushing rate.
  2,convenient repair
  3,the rotor can be positive, so that the hammer, impact plate, plate wear uniform
重要技术参数7
重要技术参数7.1

达到同产品:PCX超越细移动破碎机

下一致产品:复合圆锥破碎机

现在位置:产品受心产品受心查阅这产品的用户还可以查看相同分类下的以下产品